HR1 PRO, the thinnest and one of the lightest head flashlights available on the market. The ultra-thin 18mm (thick) lightweight lamp body weighs 46g (without battery), perfectly balanced thanks to the placement of the battery compartment at the back. The headlamp flashlight will not slip or bump against your head while running. The main use of the flashlight is for night cross-country running, cycling competitions, climbing, rescue in limited light conditions, or the wider outdoors.

Reflector

Main LED - SMO (smooth = smooth) type, made of polished aluminum provides a large perfect outer ring, inside which is perfectly round intensively shining center.

Side LED - type OP (orange peel = textured), made of aluminum provides a soft light with a wider angle, better illuminates the sides.

Body

The body is made of lightweight and environmentally friendly ABS plastic. At the top of the housing are two large and convenient switches responsible for turning on, turning off and changing modes. The seals meet the IPX6 standard.

Headband - one-piece design, made of soft breathable fabric, keeps your head comfortable and dry during activity. According to the manufacturer's tests, it still remains flexible after 5000 uses.

Power supply

High-capacity battery (1200mAh) gives energy both to use the strongest modes of light, as well as for long work on lower modes. Discharged battery does not deprive us of the possibility of using the flashlight, thanks to the included USB-C cable you can power it directly from a portable powerbank.

Lens

Hardened plastic lens. Scratch-resistant, covered with an anti-reflective layer.

Electronics

The light sources are Spot Light LED: CREE XP-G2, White Light and Flood Light LED: CREE XP-G2, Warm Light and Red Light LED: JH-3535R12S26-T7A responsible for the red light. Large, convenient buttons allow for quick activation and easy mode control. The flashlight has four operating modes and 2 special modes, SOS and Strobe.

In 2009, the American National Standard Institute (ANSI) along with the National Electrical Manufacturers Association (NEMA) created the first global standard for defining, measuring and labeling flashlights. Called ANSI / NEMA FL1, these standards allow consumers to choose the best flashlight with simple icons. FL-1 Standard (flashlight performance as measured by the new batteries included with the flashlight or recommended by the manufacturer).

• LED: 2 x CREE XP-G2 (Warm and Neutral), 1 x JH-3535R12S26-T7A (Red)
• Power supply: 1 x B33A 1200 mAh battery (included)

Light modes (Brightness / Time / Distance / Light output):

• High: 400 lm / 2 hr 30 min / 73 m / 1350 cd
• Medium: 150 lm / 6 hr 30 min / 45 m / 506 cd
• Low: 30 lm / 19 hr 30 min / 20 m / 101 cd
• Red LED: 5 lm / 26 hrs
• SOS: 150 lm / 19 hrs 30 mins
• Beacon: 400 lm / 20 hrs

IPX Standard: IPX6 - Totally protected against water jets coming from different directions with a flow rate of up to 100 liters per minute. During prolonged immersion, submersion of more than 1m, as well as acting strong pressure, there is a possibility of water entering inside objects of this class.

• Drop resistance: 1.0 m 
• Body material: Plastic
• Dimensions: 65.6 mm / 30.2 mm / 18.2 mm 
• Weight: 46.0 g 

Box Contents:

• HR1 PRO flashlight - 1 pc.
• USB-C charging cable - 1 pc.
• User manual - 1 pc.
• Rechargeable B33A 1200 mAh battery - 1 pc.