It is powered by a built-in 3.7V 380 mAh lithium-polymer battery. Thanks to an efficient LED diode and a reflector, it generates a light beam  of 800 lumens and a range of up to 130 m. A blue laser with a power of <5mW makes it easier to quickly target the target without having to match the front sight with the rear sight.  The beam is adjustable vertically and horizontally (adjusting screws are located on the side of the flashlight).

The BALDR S model is equipped with a mounting rail that can be adjusted and adapted to most pistol models with an accessory rail in the 22 mm standard (weaver/picatinny/MIL-STD-1913). The steel clamp system allows you to quickly attach the flashlight to the weapon.

The flashlight body is made of A6061-T6 aircraft aluminum covered with black hard anodization . Thanks to this design, the manufacturer ensures resistance to falls from a height of up to 1 m. The seals used guarantee IPX4 water resistance and protect against  water splashes, which allows use during light rain.

The heart of the flashlight is advanced electronics that controls the current consumed by the diode. Thanks to it, the flashlight shines with the same power until the battery is completely exhausted. The electronic system protects the diode from overheating in the highest mode (800 lumens) by reducing the current after 60 seconds and stabilizing the light at 300 lumens. After the flashlight is turned off, cooled down and turned on again, the flashlight will shine in maximum mode again.

The flashlight is turned on using a convenient thumb switch located at the back. The switch is double-sided, so the flashlight can be conveniently used by both right- and left-handed users. The flashlight is equipped with the ability to turn on the laser itself, the laser and the flashlight light, and the flashlight itself.

On the side of the flashlight there is a diode informing about the battery discharge; if the battery efficiency drops below 10%, the diode starts to glow red.

The built-in battery is charged using the included MCC cable with a magnetic tip.

The set with the flashlight includes a mount compatible with the 22 mm standard ( weaver/picatinny/MIL-STD- 1913 ), a charging cable with a magnetic tip and a set of mounting keys.

Technical data

• Color: black
• Light source: LED
• Effective range: 130 m
• Laser beam power: <5mW
• Laser wavelength: 440-460 nm
• Laser class: 3a
• Power supply: built-in 3.7V 380mAh battery
• Housing: A6061-T6 aircraft aluminum with hard anodization type. III
• Switch: electronic (double-sided)
• Dimensions: 63 x 32.5 x 36 mm
• Weight: 95 g

LIGHTING LEVELS

LEVEL 1 (lumens): 100 lumens;

Operating time 1 LEVEL: 90 minutes;

LEVEL 2 (lumens): 800 ~ 300 lumens;

Operating time LEVEL 2: 1 minute + 2 minutes + 30 minutes;

Strobe: No;

SOS/BEACON: No.