EverActive UC800 is a multi-channel universal charger with as many as ten independent channels! Eight channels are used to charge Ni-MH, Li-ion, Li-HV and Li-FePO4 cylindrical batteries. The other two channels are used to charge 9V batteries (6F22).

The UC800 charger is designed for maximum compatibility - it will charge any Ni-MH battery sizes: R6 AA, R03 AAA, R14 C, SC and 9V type batteries. In addition, UC800 also supports 3.6/3.7V Li-ion batteries, their high-voltage alternative Li-HV, whose nominal voltage is 3.85V, and Li-FePO4 batteries. In the case of lithium batteries, the charger will handle the following sizes: 10440, 14500, 14650, 17500, 17670, 18350, 18500, 18650, 20700, 21700 - also with protection, 22650, 25500, 26500, 26650, R-16350. The maximum span of the sled is up to 76mm, which will allow charging the increasingly popular 20700 and 21700 batteries in the electronically protected version.

Li-ion/Li-HV and LiFePO4 batteries are charged very accurately using the CC/CV method with a termination load of around 100mA. This guarantees complete safety and full charge of every battery, even if it is highly discharged or low capacity.

Ni-MH and 9V batteries are charged using the CC (constant current) method with very accurate dV/PVD detection - charging is completed only after reaching the maximum voltage on the battery (the value of this voltage may be different for each battery).

Wide compatibility is not the only advantage of this charger. The large, easy-to-read backlit display shows all the most important values at all times:

The most important features:

- ten independent channels, eight for cylindrical cells and two for 9-volt batteries with the ability to charge single batteries and unusual, odd combinations,

- support for all popular cylindrical elements - also the so-called. FLAT TOP - with a flat plus and batteries 20700/21700 with protection, the maximum cell length is up to 76mm!

- 0.00V battery resuscitation function - the charger can revive almost any battery,

- microprocessor controlled intelligent, accurate CC/CV charging process for Li-ion / Li-FePO4 and CC with dV/PVD for Ni-MH and 6F22/9V ,

- support for protected (PCB) and unprotected elements, as well as with a flat plus Flat Top,

- adjustable charging current for lithium cells: 4x 0.2A/0.5A/0.8A/1A/1.5A or 2x 2A (only for channels 1 and 8), for Ni-MH we have the following charging currents to choose from: 8x 0.2A / 0.5A / 0.8A / 1A, for 6F22 / 9V batteries, charging current 60mA, - large readable display with backlight, shows all the most important values on permanent basis ,

- a set of protections: from overcharging, from excessive discharge of elements, short circuit, overload, thermal, from reverse polarity of elements.

The charger will handle any other cylindrical battery with a length of 32-76mm and a maximum diameter of 30mm.

The charger has an input voltage of 12V DC, a 12V DC / 3A power adapter is included, and an optional car adapter is available.

Supported battery types

• Li-ion batteries 3.6-3.7V protected (with PCM/PCB)
• Li-ion batteries 3.6-3.7V, unprotected
• Li-ion batteries 3.8-3.85V protected (with PCM/PCB)
• Li-ion batteries 3.8-3.85V, unprotected
• LiFePO4 batteries
• Ni-MH batteries
• batteries 6F22/9V
• 8 pcs. cylindrical batteries + 2 pcs. type 9B

Supported battery sizes

• R6/AA,R03 / AAA,R14/C,10440,14500,14650,17500,17670,18350,18500,18650,20700 (also provided),21700 (also provided),22650,25500,26500,26650, 16340 / R-CR123 / 17335.6F22/XR22/9V

input voltage

• 12 V DC / 3000 mA
• power adapter included
• Maximum dimensions of the rechargeable battery (width x height) [mm] 30 x 76
• Charging method
• Processor controlled CC/CV for Li-ion/Li-FePO4
• Processor controlled CC with -ΔV/0ΔV/PVD for Ni-MH

Charger operating modes

• Charging current in CC (main) phase [mA]
• Adjustable - 200 mA - 2000 mA per channel/slot for Li-ion/Li-FePO4 (2000 mA for channels 1 and 8 only)
• 200 mA - 1000 mA per channel/slot for Ni-MH
• 60mA - for 9V batteries
• End of charge voltage
• Li-ion 4.2V ± 0.05V
• Li-FePO4 3.65V±0.05V
• Ni-MH ~ 1.45-1.55 VdV/PVD
• Lithium-HV 4.35 V ± 0.05 V
• Load current for lithium cells [mA] ~100
• Security before reboot
• Against cell overdischarge
• Overload/short circuit overload
• Thermal - against overheating of batteries Against reverse cell polarity
• Dimensions (width x depth x height) [mm] 230 x 150 x 35
• Weight [g/piece] 609.0
• Package Contents UC-800 charger, 12V/3A power supply, user manual