The L30 Gen II is Acebeam's most powerful tactical flashlight. Based on the CREE XHP70.2 LED and the possibility to use a 3.7V 21700 lithium battery it makes the L30 capable of delivering 4000 ANSI/FL1 lumen. The upgrade from 20700 battery to a 21700 battery is the main difference with the previous generation L30.
The beamdistance is up to 373 meters, because as the XHP70.2 LED is very big, the beam is a bit more widespread than the beam of the L16. But by using a 21700 battery Acebeam has made sure that the L30 Gen II has a good runtime. The 21700 battery has improved it significantly.
Also this battery can be recharged inside the L30 Gen II through the micro-USB port.
- LED: 1*Cree XHP70.2 LED with a lifespan of 50,000 hours
- Max. output 4000 lumens by using 1*20700 battery （included)
- Modes:
- Firefly: 1 lm, 59 days
- Low: 200 lms, 12 hours
- Mid: 1000 lms, 2.5 hours
- High: 2000 lms, 1.1 hours
- Turbo: 4000 lms, 2 mins + 1 hour
- Strobe: 2000 lms, 2 hours
- Working voltage: 3V - 8.4V
- Max. runtime: 45 days
- Max. beam distance: 373 meters
- Peak beam intensity: 34800cd
- Impact resistant: 1.2 meters
- Waterproof to IPX8 standard, 5m
- Size: 162mm (length) x 48mm (head dia.) x 25.4mm (body dia.)
- Weight: 168g without battery
- Aircraft grade aluminum body structure
- Premium Type III Hard Anodized Anti-abrasive finish
- Ultra-clear tempered glass lens with anti-reflective coating
- Strobe mode for tactical emergency use
- Smooth reflector for max. light output
- Tactical knurling for firm grip
- Streamlined body design
- Intelligent highly efficient circuit board design for max. performance and long time time
- Specially designed for Military, Law Enforcement, Self-defence, Hunting, Search & Rescue and outdoor activities
- Please note:
- For the L30 to work at Peak Performance 4000 lumens it needs to be powered by a battery that can deliver enough ampere. So for instance the ACEBEAM 20700 (4250mAh) or ARC18650H-310A (3100mAh) battery or the the same batteries of other brands.
- Please use ACEBEAM original 18650/20700 batteries with PCB protection with 4 MOSFETs installed or a high drain 18650/20700 battery without PCB protection. (When using the normal 18650 battery with PCB protection which has less than 4 MOSFETs installed, it will work at 1000-2000 lumens; when using 2 x CR123A batteries, the Max output could reach only 1500lms, so that is not really recommended.)